CNHTC

Elementor #9427

Failures And Solutions, For Sinotruk Howo Truck Cabin Lifting Pump And Cylinder

The oil cylinder is working fine (especially the electric pump), but the cab is not moving.
Causes of failure and solutions:
1- The switch is not at the lifting position → Move the switch e to the lifting position.
2- The air plug on the oil tank are blocked → Clean the air plug.
 
 
The lift controller is not responding, and the electric pump does not work.
Causes of failure and solutions:
1- Power is not connected → Check if the power is connected and whether the vehicle is at neutral gear.
2- The air plug on the oil tank are blocked → Clean the air plug. 
3- The pins of the connector are loose thus the contact is poor → Re-fix the pins of the connector.
4- Fuse burned → Check the fuse box.
5- Incorrect installation for controller → Check wires and tubes. Please see images below.

Failures And Solutions, For Sinotruk Howo Truck Cabin Lifting Pump And Cylinder
Failures And Solutions, For Sinotruk Howo Truck Cabin Lifting Pump And Cylinder

The relay of controller is making tick-tick sound, and the electric pump motor does not work.
Causes of failure and solutions:
1- The electric circuit is not connected well → Check whether the vehicle is in neutral gear, and check whether the wires are burned or cut or disconnected, check fuses also.
2- The motor is damaged → Replace the electric pump assembly.
 

After the cab is raised halfway, the electric pump stops working.
Causes of failure and solutions:
The electric pump control circuit is cut → Check whether the power of the whole vehicle is connected and whether the whole vehicle is in neutral gear, and check fuses.
 

The pump works, but cabin no longer lifting after lifting at halfway.
Causes of failure and solutions:
No enough oil in the oil tank → Lower the cab to the original position, and add oil. Please see image below.

Failures And Solutions, For Sinotruk Howo Truck Cabin Lifting Pump And Cylinder

The cab continuously slides down.
Causes of failure and solutions:
The inside of the hydraulic system is contaminated, causing the steel ball inside the hydraulic control valve does not seal the hole well → Clean the oil circuit route and add new oil.
 

The system works, but cabin lifts or falls more slowly than normal.
Causes of failure and solutions:
1- The air plug on the oil tank are blocked → Clean the air plug.
2- The inside of the hydraulic system is contaminated → Clean the whole oil route and add new oil. (WG9719826001)
 

Cabin simply does not fall.
Causes of failure and solutions:
Parking at the position for too long, the cylinder limit pawl is locked /jammed → Move switch to “up” position, pump it up a little, then switch to the “down” position, and fall.
 
 
When the cab is falling, bubbles and oil overflow at air plug, and oil leakage at oil pump and oil sump, or even the oil sump bursts.
Causes of failure and solutions:
Too much oil → Check the image above for oil adding, and remove the extra oil.
 

“Leaking” oil in the oil tank air plug.
Causes of failure and solutions:
Normal Phenomenon → Automatic oil discharge phenomenon of air plug.



Other News Pages:

– Sitrak C7H 440 Horsepower 6X4 Tractor Specifications & Prices

– Sitrak C7H 6X2 & 4X2 Tractor Truck Specifications and Prices

– Sinotruk Sitrak 4X2 Specifications & Price

Vehicles Categories
Truck Spare Parts Categories
Request A Free Quote

发表评论

您的电子邮箱地址不会被公开。